Question 1

What is the main difference between Asian Paints Royale Shyne and Asian Paints Royale Luxury Emulsion?

Accepted Answer

Royale Shyne provides a high-sheen satin gloss finish with higher washability, whereas Royale Luxury Emulsion offers a smooth soft-sheen rich finish. Asian Paints Royale Shyne has a higher resin solids concentration which produces a radiant, high-sheen surface. It reflects light brightly, giving walls a glowing silk effect and offering high stain washability with Teflon surface protector. Royale Luxury Emulsion has a more muted, subtle soft sheen that conceals minor plaster imperfections better while providing luxury stain resistance.

Question 2

How do I stop wall dampness, white salt powder (Shora / Efflorescence) in Kolkata homes?

Accepted Answer

Treat the bare brick or plaster with Dr. Fixit Dampguard Classic or Asian Paints SmartCare Damp Block, followed by waterproof primer. White powdery deposits (shora/efflorescence) occur when ground moisture carries hygroscopic salts through brickwork in humid climates like Kolkata. Steps to permanently cure: 1. Scrape wall down to bare plaster. 2. Wash with dilute muriatic acid or clean water and dry for 24 hrs. 3. Apply 2 coats of Dr. Fixit Dampguard Epoxy seal coating or SmartCare Damp Block. 4. Allow 8-12 hours curing. 5. Apply waterproof acrylic putty and primer before final topcoat.

Question 3

How does Birla Opus paint compare with Asian Paints and Berger Paints in durability and price?

Accepted Answer

Birla Opus offers ~10-15% superior coverage and high scrub resistance at competitive launch pricing, directly rivaling Asian Paints Royale and Berger Silk. Birla Opus (Grasim Industries / Aditya Birla Group) features advanced micro-acrylic polymer emulsion with high opacity pigments. In testing, Birla Opus One Pure Elegance shows superior hiding power per liter (140-160 sq.ft/L for 2 coats) compared to standard interior emulsions. Furthermore, Birla Opus provides guaranteed 100,000+ scrub cycles on luxury grades with anti-fungal shield optimized for tropical humidity.

Question 4

Which waterproofing chemical should I mix with cement for plastering roof slabs and outer walls?

Accepted Answer

Mix Dr. Fixit 101 LW+ or SikaCim / SikaLatex Power at 200ml per 50kg bag of cement. When mixing concrete or motor plaster, integral waterproofing liquid chemicals like Dr. Fixit 101 LW+ or SikaCim lower the water-cement ratio, block capillary pores in plaster, and increase compressive bond strength. For structural repair joints and columns, use polymer-modified SikaLatex Power SBR latex.

Question 5

What is the correct step-by-step process for fresh wall painting in a new flat?

Accepted Answer

Process: Sand plaster -> 1 coat Water-based Primer -> 2 coats Acrylic Wall Putty -> Sanding -> 1 coat Primer -> 2 coats Emulsion Topcoat. For fresh, unpainted cement plaster: 1. Allow fresh plaster to cure for minimum 28 days. 2. Rub with Emery paper 80/100 to remove loose grit. 3. Apply 1 coat of Asian Paints / Berger Exterior-Interior Primer to seal porosity. 4. Apply 2 coats of Birla White WallCare Putty (1-1.5mm combined thickness). 5. Sand smooth with 180-grit & 320-grit paper. 6. Apply 1 coat Primer as topcoat sealer. 7. Apply 2 coats of interior luxury emulsion (Royale / Silk / Opus One) with 4 hours drying time between coats.

Question 6

What is the drying time and recoating interval for Berger WeatherCoat Long Life on exterior walls?

Accepted Answer

Touch dry in 30 minutes; mandatory recoat interval is 4 to 6 hours under standard humidity. Berger WeatherCoat Long Life is a heavy-duty silicone-acrylic exterior emulsion with PU tile technology. Surface touch drying occurs in 30-45 minutes in warm weather, but full chemical cross-linking requires 4 to 6 hours. Applying the second coat too quickly traps moisture between layers, causing blistering in heavy monsoon rains.

Question 7

How can I calculate how many liters of paint I need for a 1000 sq ft carpet area flat?

Accepted Answer

A 1000 sq ft carpet flat has approx 2800-3200 sq ft paintable wall area. You will need approx 20L interior paint, 30L primer, and 80-100kg wall putty for fresh work. To estimate wall paint area: Multiply carpet area by 3 to 3.5 (including ceilings and internal walls minus doors/windows). For 1000 sq ft carpet area: Total wall area = ~3000 sq ft. Divided by paint coverage (~140 sq ft/L for 2 coats) = ~21.4 Liters of interior emulsion. Use Islamia Paints free online Paint Calculator for exact bucket breakdown.

Question 8

Why should I choose Asian Paints Royale Health Shield for bedrooms and kids rooms?

Accepted Answer

Royale Health Shield contains Silver Ion technology that kills 99.9% of bacteria on walls and is certified asthma & allergy friendly. Asian Paints Royale Health Shield is an ultra-luxury interior emulsion equipped with Silver Ion technology independently tested to eliminate disease-causing bacteria (such as E. coli and Staph) on wall surfaces. It features Zero-VOC or extremely low VOC emissions, ensuring clean indoor air quality free from toxic chemical fumes.

Question 9

What is the difference between SikaLatex Power and Dr. Fixit Pidicrete URP SBR waterproofing polymers?

Accepted Answer

Both are high-grade SBR (Styrene Butadiene Rubber) bonding agents; SikaLatex Power offers higher solids content for structural repair joints. SikaLatex Power is a specialized water-resistant synthetic rubber emulsion used as a bonding slurry with cement for repair mortar and waterproofing coats on bridge decks, basements, and terrace water tanks. Dr. Fixit Pidicrete URP is a versatile styrene-butadiene copolymer latex widely used for general structural modifications and slurry coats. Both provide excellent adhesion and lower shrinkage cracks.

Question 10

How do computer color tinting machines work at Islamia Paints Topsia?

Accepted Answer

Automated tinting dispenses exact volumetric microliters of high-concentration colorant into clear or white base cans according to precise digital formula codes. Every paint brand (Asian Paints Colour-World, Berger Express Dispenser, Birla Opus Tinting) manufactures factory cans filled with specific Base types (Base 1 for light pastels, Base 2/3 for medium tones, Base 4 or Clear Base for vibrant deep colors like crimson red or deep royal navy). The computer software controls high-precision gyroscopic pumps that inject lightfast pigments into the base can, followed by 3 minutes of high-speed mechanical shaking.

Question 11

Can I apply Birla White Waterproof Putty on damp exterior walls before exterior paint?

Accepted Answer

Yes, Birla White Waterproof WallCare Putty contains hydrophobic silane additives that prevent water penetration. Birla White WallCare Waterproof Putty is specially formulated with white cement, re-dispersible polymers, and hydrophobic chemicals. Unlike normal wall putty which softens when wet, waterproof putty forms an impermeable barrier against dampness and efflorescence on exterior plasters.

Question 12

What is Asian Paints Apex Ultima Protek 10 Year Warranty system for exterior walls?

Accepted Answer

Apex Ultima Protek is a nano-transfer, fiber-reinforced elastomeric coating that bridges cracks up to 2mm with a 10-year durability warranty. Asian Paints Apex Ultima Protek uses cross-linking elastomeric polymers containing synthetic reinforcing fibers. It stretches over substrate micro-cracks without breaking the surface film, keeping heavy torrential rain out while releasing internal moisture vapor. Combined with Ultima Protek Duralife primer, it carries a 10-year performance warranty against fading and algae growth.

Question 13

How to clean stubborn tea, oil, and crayon stains from Berger Silk Glamor walls?

Accepted Answer

Wipe with a soft cotton cloth dampened with mild soapy warm water. Do not scrub with wire mesh or harsh abrasives. Berger Silk Glamor features Crystal Reflective technology and Teflon surface protection. Everyday household stains like tea, pencil marks, and grease do not penetrate the polyurethane modified polymer matrix. Allow the stain to loosen with mild liquid soap solution for 30 seconds, then gently wipe in circles.

Question 14

What is the dilution ratio for Dr. Fixit Raincoat Select exterior waterproofing coat?

Accepted Answer

Do not dilute Dr. Fixit Raincoat Select with water for topcoats; apply as direct supply from container for 100% elastic membrane. Dr. Fixit Raincoat Select is a heavy-bodied elastomeric liquid membrane. For the primer coat, dilute with 100% clean water (1:1 ratio) to ensure deep pore penetration. For the subsequent 2 topcoats, apply UN-DILUTED to achieve 110-120 micron dry film thickness.

Question 15

How does Birla Opus Style Color texture collection transform feature walls?

Accepted Answer

Birla Opus Style metallic and stucco textures create 3D visual depth like marble, velvet, or rust effects on accent walls. Birla Opus Style is a high-grade textured emulsion containing mineral fillers and metallic effect pigments. Using specialized trowels, stencils, or comb tools, trained applicators craft patterns like Metallic Stucco, Venetian Plaster, Velvet Swirl, or Concrete Industrial Finish.

Paints & Wall Moisture Q&A Encyclopedia